Two Piece Ostomy Bag

Intended for the collection of ostomy excretions.

(I) Installation Method

1. Before installation, blow a small amount of air into the bag to prevent the walls from sticking together.
2. Align the bag's flange with the baseplate coupling. Press firmly step-by-step from bottom to top until a light 'click' is heard, indicating the bag is securely locked to the baseplate.
3. Gently pull the bag to verify the seal is secure.

Note: For open bags, the closure should be folded and prepared before installation to ensure a leak-proof seal.

(II) Removal and Replacement

4. Press the baseplate with one hand while gently pulling the removal tab with the other fingers. Slowly peel the bag away from the baseplate from top to bottom.
5. Ensure the bag is tilted upward during removal to prevent spillage.

(III) Drainage Method

6. Lift the drainage end, hold the outlet securely, and remove the closure or plug.
7. Unfold the drainage port and empty the contents.

Note: Closed bags should be discarded directly once they reach capacity.

1. Select the appropriate model and specification based on the stoma baseplate size. Urostomy bags are specifically designed for urostomy patients.
2. If gas accumulation occurs, use a pin to puncture the vent at the top of the bag. Using bags with activated carbon filters is recommended for odor control.
3. Use with caution if allergic to product materials.
4. Replace as needed. Do not flush used bags down the toilet or sewer. Dispose of responsibly in accordance with environmental protection guidelines.
5. Inspect regularly for leaks and replace immediately if any occur.
6. Single-use only. Non-sterile.